Alcatel-Lucent 7210 SAS M Service Manual page 920

Show, Clear, Debug Commands
Sample output
*A:7210-SAS>show>service>id>igmp-snooping# mvr
===============================================================================
IGMP Snooping Multicast VPLS Registration info for service 2
===============================================================================
IGMP Snooping Admin State : Down
MVR Admin State
MVR Policy
-------------------------------------------------------------------------------
Local SAPs/SDPs
-------------------------------------------------------------------------------
Svc Id
-------------------------------------------------------------------------------
2
2
-------------------------------------------------------------------------------
MVR SAPs (from-vpls=2)
-------------------------------------------------------------------------------
Svc Id
-------------------------------------------------------------------------------
No MVR SAPs found.
===============================================================================
*A:7210-SAS>show>service>id>igmp-snooping#
port-db
Syntax port-db sap sap-id [detail]
port-db sap sap-id group grp-address
port-db sdp sdp-id:vc-id [detail]
port-db sdp sdp-id:vc-id group grp-address
Context show>service>id>igmp-snooping
This command displays information on the IGMP snooping port database for the VPLS service.
Description
group grp-ip-address — Displays the IGMP snooping port database for a specific multicast group
Parameters
sap sap-id — Displays the IGMP snooping port database for a specific SAP. See
Page 920
Label
Num Groups
Sap/Sdp
Id
sap:1/1/1
sap:1/1/4
Sap/Sdp
Id
address.
Command Descriptions on page 939
Specifies the number of groups learned via this local SAP.
: Down
: None
Oper From
State VPLS
Up 1
Up Local
Oper From
State VPLS
for command syntax.
Description
Num Local
Groups
0
0
Num MVR
Groups
7210 SAS M Services Guide
Common CLI