Alcatel-Lucent 7210 SAS M Service Manual page 702

Show, Clear, Debug Commands
ip-addr — The IP address of the interface for which to display matching SAPs.
ip-int-name — The IP interface name for which to display matching SAPs.
Show Service SAP — The following table describes show service SAP output fields:
Output
Sample Output
*A:DUT-B# show service sap-using sap 1/1/3:100.*
=========================================================================
Service Access Points
=========================================================================
PortId
-------------------------------------------------------------------------
1/1/1
1/1/2
-------------------------------------------------------------------------
Number of SAPs : 2
=========================================================================
*A:DUT-B#
Page 702
1.0.0.0 — 223.255.255.255
Values
Label
Port ID
Svc ID
SapMTU
Igr.QoS
Ing.Fltr
E.QoS
Egr.Fltr
A.Pol
Adm
Opr
The ID of the access port where the SAP is defined.
The value that identifies the service.
The SAP MTU value.
The SAP ingress QoS policy number specified on the ingress SAP.
The MAC or IP filter policy ID applied to the ingress SAP.
The SAP egress QoS policy number specified on the egress SAP.
The MAC or IP filter policy ID applied to the egress SAP.
The accounting policy ID assigned to the SAP.
The administrative state of the SAP.
The actual state of the SAP.
SvcId Ing.
QoS
6 1
700 1
Description
Ing. Egr. Adm
Fltr Fltr
none none Up
none none Up
7210-SAS M Services Guide
Opr
Down
Down