Alcatel-Lucent 7210 SAS M Service Manual page 682

Show, Clear, Debug Commands
Class Forwarding
EnforceDSTELspFc
Default LSP
Multicast LSP
Number of SDPs
Sample Output
*A:ALA-7210M# show service sdp
==============================================================================
Services: Service Destination Points
==============================================================================
SdpId
------------------------------------------------------------------------------
10
40
60
100
500
------------------------------------------------------------------------------
Number of SDPs : 5
==============================================================================
*A:ALA-7210M#
sdp-using
Syntax sdp-using [sdp-id[:vc-id] | far-end ip-address]
Context show>service
This command displays services using SDP or far-end address options.
Description
sdp-id — Displays only services bound to the specified SDP ID.
Parameters
Values
Page 682
Label
Indicates the admin state of class-based forwarding on this SDP. When the
value is true, class-based forwarding is enabled.
Specifies whether service manager must validate with RSVP the support of
the FC by the LSP.
Specifies the LSP ID that is used as a default when class-based forwarding is
enabled on this SDP. This object must be set when enabling class-based for-
warding.
Displays the LSP ID that all multicast traffic will be forwarded on when
class-based forwarding is enabled on this SDP. When this object has its
default value, multicast traffic will be forwarded on an LSP according to its
forwarding class mapping.
The total number of SDPs displayed according to the criteria specified.
Adm MTU Opr MTU IP address
4462 4462 10.20.1.3
4462 1534 10.20.1.20
4462 1514 10.20.1.21
4462 4462 180.0.0.2
4462 4462 10.20.1.50
1 — 17407
Description (Continued)
Adm Opr Deliver Signal
Up Dn NotReady MPLS
Up Up MPLS
Up Up MPLS
Down Down MPLS
Up Dn NotReady MPLS
7210 SAS M Services Guide
TLDP
TLDP
TLDP
TLDP
TLDP