Alcatel-Lucent 7210 SAS M Service Manual page 391

This command specifies whether this port is allowed to become an STP root port. It corresponds to
Description
the restrictedRole parameter in 802.1Q. If set, it can cause lack of spanning tree connectivity.
no root-guard
Default
tod-suite
Syntax tod-suite tod-suite-name
no tod-suite
Context config>service>vpls>sap
This command applies a time-based policy (filter or QoS policy) to the service SAP. The suite name
Description
must already exist in the config>cron context.
no tod-suite
Default
tod-suite-name — Specifies collection of policies (ACLs, QoS) including time-ranges that define the
Parameters
vsi-id
Syntax vsi-id
Context config>service>vpls>bgp-ad
This command enables the context to configure the Virtual Switch Instance Identifier (VSI-ID).
Description
prefix
Syntax prefix low-order-vsi-id
no prefix
Context config>service>vpls>bgp-ad>vsi-id
This command specifies the low-order 4 bytes used to compose the Virtual Switch Instance Identifier
Description
(VSI-ID) to use for NLRI in BGP auto-discovery in this VPLS service.
If no value is set, the system IP address will be used.
no prefix
Default
low-order-vsi-id — Specifies a unique VSI ID.
Parameters
7210 SAS M Services Guide
full or partial behavior of a SAP. The suite can be applied to more than one SAP.
0— 4294967295
Values
Virtual Private LAN Services
Page 391