Alcatel-Lucent 7210 SAS M Service Manual page 898

Show, Clear, Debug Commands
sap
Syntax sap sap-id [filter]
Context show>service>id
This command displays information for the SAPs associated with the service.
Description
If no optional parameters are specified, a summary of all associated SAPs is displayed.
sap sap-id — The ID that displays SAPs for the service in the slot/mda/port[.channel] form. See
Parameters
detail — Displays detailed information for the SAP.
Show Service-ID SAP — The following table describes show service SAP fields:
.
Page 898
Common CLI Command Descriptions on page 939
Label
Service Id
SAP
Encap
Ethertype
Admin State
Oper State
Flags
Last Status Change
Last Mgmt Change
Ingress qos-pol-
icy
Ingress Filter-Id
Egress Filter-Id
Acct. Pol
Collect Stats
The service identifier.
The SAP and qtag.
The encapsulation type of the SAP.
Specifies an Ethernet type II Ethertype value.
The administrative state of the SAP.
The operational state of the SAP.
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, L2OperDown, RelearnLimitEx-
ceeded, ParentIfAdminDown,
NoSapIpipeCeIpAddr, TodResourceUnavail,
TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing,
SapIngressNamedPoolMismatch, SapEgressNamedPoolMismatch,
NoSapEpipeRingNode.
Specifies the time of the most recent operating status change to this
SAP
Specifies the time of the most recent management-initiated change to
this SAP.
The ingress QoS policy ID assigned to the SAP.
The ingress filter policy ID assigned to the SAP.
The egress filter policy ID assigned to the SAP.
The accounting policy ID assigned to the SAP.
Specifies whether collect stats is enabled.
for command syntax.
Description
7210 SAS M Services Guide