Configuring an IES Service with CLI
Configuring IES Components
Use the CLI syntax to configure the following entities:
•
Configuring an IES Service on page 884
•
Configuring IES Interface Parameters on page 886
Configuring an IES Service
Use the following CLI syntax to create an IES service:
The following example displays a basic IES service configuration.
A:ALA-48>config>service#
----------------------------------------------
...
ies 1001 customer 1730 vpn 1001 create
exit
----------------------------------------------
A:ALA-48>config>service#
Page 884
→
Configuring IES Subscriber Interface Parameters on page 885
→
Configuring Spoke-SDP Parameters on page 887
→
Configuring SAP Parameters on page 888
→
Configuring VRRP on page 890
description "to-internet"
no shutdown
7750 SR OS Services Guide