Alcatel-Lucent 7210 SAS M Service Manual page 527

IES Global Commands
ies
Syntax ies service-id customer customer-id [create]
no ies service-id
Context config>service
This command creates or edits an IES service instance.
Description
The ies command is used to create or maintain an Internet Enhanced Service (IES). If the service-id
does not exist, a context for the service is created. If the service-id exists, the context for editing the
service is entered.
IP interfaces defined within the context of an IES service ID must have a SAP created.
When a service is created, the customer keyword and customer-id must be specified and associates
the service with a customer. The customer-id must already exist having been created using the
customer command in the service context. Once a service has been created with a customer
association, it is not possible to edit the customer association. The service must be deleted and
recreated with a new customer association.
Once a service is created, the use of the customer customer-id is optional for navigating into the
service configuration context. Attempting to edit a service with the incorrect customer-id specified
will result in an error.
More than one IP interface may be created within a single IES service ID.
By default, no IES service instances exist until they are explicitly created.
The no form of this command deletes the IES service instance with the specified service-id. The
service cannot be deleted until all the IP interfaces defined within the service ID have been shutdown
and deleted.
service-id — The unique service identification number or string identifying the service in the service
Parameters
customer
customer customer-id — Specifies the customer ID number to be associated with the service. This
service-name
Syntax service-name service-name
no service-name
7210-SAS M Services Guide
domain. This ID must be unique to this service and may not be used for any other service of any
type. The service-id must be the same number used for every 7750 SR, 7450 ESS and 7710 SR
on which this service is defined.
Values
service-id:
parameter is required on service creation and optional for service editing or deleting.
1 — 2147483647
Values
IES Service Configuration Commands
1 — 2147483648
Page 527