Common Configuration Tasks - Alcatel-Lucent 7210 SAS M Service Manual

Common Configuration Tasks

This section provides a brief overview of the tasks that must be performed to configure both local
VPLS services and provides the CLI commands.
For VPLS services:
1. Associate VPLS service with a customer ID
2. Define SAPs:
3. Modify STP default parameters (optional) (see
4. Enable service
7210 SAS M Services Guide
−
Select node(s) and port(s)
−
Optional — Select QoS policies other than the default (configured in
config>qos
−
Optional — Select filter policies (configured in
−
Optional — Select accounting policy (configured in
263)
context)
VPLS and Spanning Tree Protocol on page
Virtual Private LAN Services
context)
config>filter
context)
config>log
Page 309