Vprn Clear Commands - Alcatel-Lucent 7210 SAS M Service Manual

Show, Clear, Debug Commands

VPRN Clear Commands

arp-host
Syntax arp-host
arp-host { mac ieee-address | sap sap-id | ip-address ip-address[/mask] }
arp-host [port port-id] [inter-dest-id intermediate-destination-id | no-inter-dest-id]
arp-host statistics [sap sap-id | interface interface-name]
Context clear>service>id
This command clears ARP host data.
Description
forwarding-table
Syntax forwarding-table [slot-number]
Context clear>router
This command clears the route table on the specified IOM with the route table.
Description
If the slot number is not specified, the command forces the route table to be recalculated.
slot-number — Clears the specified IOM slot.
Parameters
interface
Syntax interface [ip-int-name | ip-addr] [icmp]
Context clear>router
This command clears IP interface statistics.
Description
If no IP interface is specified either by IP interface name or IP address, the command will perform the
clear operation on all IP interfaces.
ip-int-name | ip-addr — The IP interface name or IP interface address.
Parameters
icmp — Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limit.
damping
Syntax damping [[ip-prefix/mask] [neighbor ip-address]] | [group name]
Page 792
all IOMs
Default
1 - 10 (depending on chassis model)
Values
All IP interfaces.
Default
7210-SAS M Services Guide