Alcatel-Lucent 7210 SAS M Service Manual page 461

source-bmac
Syntax source-bmac ieee-address
no source-bmac
Context config>service>pbb
This command configures the base source BMAC for the B-VPLS. The first 32 bits must be the same
Description
with what is configured in the MC-LAG peer. If the base source BMAC is not configured, it inherits
the chassis level BMAC configured under the PBB object added in the previous section.
ieee-address — The MAC address assigned to the BMAC. The value should be input in either a
Parameters
backbone-vpls
Syntax backbone-vpls service-id [isid isid]
no backbone-vpls
Context
config>service>vpls
config>service>vpls>pbb
This command configures B-VPLS service associated with the I-VPLS.
Description
service-id — Specifies the service ID.
Parameters
isid — Specifies the ISID.
7210 SAS M Services Guide
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx format.
1..2147483648
Values
0..16777215
Values
VPLS Service Commands
Page 461