Alcatel-Lucent 7210 SAS M Service Manual page 742

Show, Clear, Debug Commands
interface
Syntax interface [ip-address | ip-int-name] [detail]
Context show>service>id
Displays information for the IP interfaces associated with the service.
Description
If no optional parameters are specified, a summary of all IP interfaces associated to the service are
displayed.
ip-address — The IP address of the interface for which to display information.
Parameters
ip-int-name — The IP interface name for which to display information.
detail — Displays detailed IP interface information.
Show Service-ID Interface — The following table describes show service-id interface output
Output
Page 742
1.0.0.0 — 223.255.255.255
Values
IP interface summary output.
Default
fields:
Label
Interface-Name
Type
IP-Address
Adm
Opr
Interface
If Name
Admin State
Oper State
IP Addr/mask
Details
If Index
If Type
Port Id
SNTP B.Cast
Arp Timeout
MAC Address
The name used to refer to the interface.
Specifies the interface type.
Specifies the IP address/IP subnet/broadcast address of the interface.
The desired state of the interface.
The operating state of the interface.
The name used to refer to the interface.
The desired state of the interface.
The operating state of the interface.
Specifies the IP address/IP subnet/broadcast address of the interface.
The index corresponding to this interface. The primary index is 1. For
example, all interfaces are defined in the Base virtual router context.
Specifies the interface type.
Specifies the SAP's port ID.
Specifies whether SNTP broadcast client mode is enabled or disabled.
Specifies the timeout for an ARP entry learned on the
interface.
Specifies the 48-bit IEEE 802.3 MAC address.
Description
7210-SAS M Services Guide