Alcatel-Lucent 7210 SAS M Service Manual page 80

Ethernet Connectivity Fault Management (ETH-CFM)
The examples below show the global ETH-CFM configuration and the advanced Y.1731 functions
that can be configured. The configuration will reject the configuration of Y.1731 functions within
an IEEE 802.1ag context.
*A:7210-2# config>eth-cfm# info
----------------------------------------------
*A:7210-2# config>service# info
----------------------------------------------
----------------------------------------------
Notes:
•
•
Page 80
domain 1 format none level 1
association 1 format icc-based name "1234567890123"
bridge-identifier 100
exit
ccm-interval 1
exit
exit
vpls 100 customer 1 create
stp
shutdown
exit
sap 2/2/1:40 create
eth-cfm
mep 1 domain 1 association 1 direction up
ais-enable
priority 2
interval 60
exit
eth-test-enable
test-pattern all-ones crc-enable
exit
no shutdown
exit
exit
exit
no shutdown
exit
To be able to transmit and also receive AIS PDUs, a Y.1731 MEP must have ais-enable
set.
To be able to transmit and also receive ETH-Test PDUs, a Y.1731 MEP must have eth-
test-enable set.
7210 SAS M Services Guide