Alcatel-Lucent 7210 SAS M Service Manual page 478

Show Commands
===============================================================================
*A:7210-SAS>show>service#
base
Syntax base
Context show>service>id
This command displays basic information about the service including service type, description and
Description
SAPs.
Show service ID base output — The following table describes the command output fields.
Output
Page 478
Label
Service Id
Service Type
Description
Customer Id
Last Status Change
Last Mgmt Change
Admin State
Vc Switching
SAP Count
Uplink Type
Vpn Id
Oper State
SAP
Encap
Vpn Id
Oper State
SAP
The service identifier.
Specifies the type of service.
Generic information about the service.
The customer identifier.
The date and time of the most recent status change to this cus-
tomer.
The date and time of the most recent management-initiated change
to this customer.
The administrative state of the service
Displays the status of VC switching .
The number of SAPs specified for this service.
Displays the mode of the device.
The number which identifies the VPN.
The operational state of the service.
Displays the SAP ID.
The value of the label used to identify this SAP on the access port.
The number which identifies the VPN.
The operational state of the service.
Displays the SAP ID.
7210-SAS M Services Guide
Description