Alcatel-Lucent 7210 SAS M Service Manual page 459

PBB Service Commands
VPLS Service Commands
vpls
Syntax vpls service-id [customer customer-id] [create][ vpn vpn-id] [m-vpls]
service-id [customer customer-id] [create] [vpn vpn-id] [m-vpls] [svc-sap-type {null-
star|dot1q-preserve|any}] [customer-vid vlan-id] [b-vpls]
no vpls service-id
Context config>service
This command creates or edits a Virtual Private LAN Services (VPLS) instance. The vpls command
Description
is used to create or maintain a VPLS service. If the service-id does not exist, a context for the service
is created. If the service-id exists, the context for editing the service is entered.
A VPLS service connects multiple customer sites together acting like a zero-hop, layer 2 switched
domain. A VPLS is always a logical full mesh.
When a service is created, the create keyword must be specified if the create command is enabled in
the environment context. When a service is created, the customer keyword and customer-id must be
specified and associates the service with a customer. The customer-id must already exist having been
created using the customer command in the service context. Once a service has been created with a
customer association, it is not possible to edit the customer association. The service must be deleted
and recreated with a new customer association.
Once a service is created, the use of the customer customer-id is optional for navigating into the
service configuration context. Attempting to edit a service with the incorrect customer-id specified
will result in an error.
More than one VPLS service may be created for a single customer ID.
By default, no VPLS instances exist until they are explicitly created.
The no form of this command deletes the VPLS service instance with the specified service-id. The
service cannot be deleted until all SAPs and SDPs defined within the service ID have been shutdown
and deleted, and the service has been shutdown.
any — Allows any SAP type. When svc-sap-type is set to any, for a NULL SAP, the system
Parameters
service-id — The unique service identification number identifying the service in the service domain.
7210 SAS M Services Guide
processes and forwards only packets with no VLAN tag (that is, untagged). All other packets
with one or more VLAN tags (even those with priority tag only) are not processed and dropped.
Users can use the service with svc- sap-type set to `null-star' to process and forward packets with
one or more tags (including priority tag) on a null SAP.
null-star
Default
This ID must be unique to this service and may not be used for any other service of any type. The
service-id must be the same number used for every 7210 SAS on which this service is defined.
1 — 2147483648
Values
PBB Service Commands
Page 459