Alcatel-Lucent 7210 SAS M Service Manual page 871

service-using
Syntax service-using [epipe] [vpls] [mirror] [customer customer-id]
Context show>service
This command displays the services matching certain usage properties. If no optional parameters are
Description
specified, all services defined on the system are displayed.
epipe — Displays matching Epipe services.
Parameters
vpls — Displays matching VPLS instances.
mirror — Displays matching mirror services.
customer customer-id — Displays services only associated with the specified customer ID.
Show Service Service-Using — The following table describes show service service-using output
Output
fields:
Sample Output
*A:ALA-12# show service service-using customer 10
==============================================================================
Services
==============================================================================
ServiceId
------------------------------------------------------------------------------
1
100
300
------------------------------------------------------------------------------
Matching Services : 3
==============================================================================
*A:ALA-12#
*A:ALA-12# show service service-using epipe
===============================================================================
7210 SAS M Services Guide
Services associated with a customer.
Default
1 — 2147483647
Values
Label
Service Id
Type
Adm
Opr
CustomerID
Last Mgmt Change
Type
VPLS
IES
Epipe
The service identifier.
Specifies the service type configured for the service ID.
The administrative state of the service.
The operating state of the service.
The ID of the customer who owns this service.
The date and time of the most recent management-initiated change to
this service.
Adm Opr CustomerId
Up Up 10
Up Up 10
Up Up 10
VPLS Show Commands
Description
Last Mgmt Change
09/05/2006 13:24:15
09/05/2006 13:24:15
09/05/2006 13:24:15
Page 871