Alcatel-Lucent 7210 SAS M Service Manual page 115

mac-address — Specifies the MAC address of the MEP.
Parameters
no mac-address
Default
domain
Syntax domain md-index [format md-name-format] [name md-name] level level
domain md-index
no domain md-index
Context config>eth-cfm
This command configures Connectivity Fault Management domain parameters.
Description
The no form of the command removes the MD index parameters from the configuration.
md-index — Specifies the Maintenance Domain (MD) index value.
Parameters
format — Specifies a value that represents the type (format).
name md-name — Specifies a generic Maintenance Domain (MD) name.
level level — Specifies the integer identifying the maintenance domain level (MD Level). Higher
association
Syntax association ma-index [format ma-name-format] name ma-name
association ma-index
no association ma-index
Context configeth-cfm>domain
This command configures the Maintenance Association (MA) for the domain.
Description
ma-index — Specifies the MA index value.
format — Specifies a value that represents the type (format).
7210 SAS M Services Guide
6-byte unicast mac-address (xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx) of the MEP.
Values
Using the all zeros address is equivalent to the no form of this command.
1 — 4294967295
Values
string
Default
1 — 43 characters
Values
numbers correspond to higher maintenance domains, those with the greatest physical reach, with
the highest values for customers' CFM packets. Lower numbers correspond to lower
maintenance domains, those with more limited physical reach, with the lowest values for single
bridges or physical links.
0 — 7
Values
1 — 4294967295
Values
integer
Default
Subscriber Services
Page 115