Alcatel-Lucent 7210 SAS M Service Manual page 481

Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier
-------------------------------------------------------------------------------
sap:1/1/2:2
===============================================================================
*A:7210-SAS>show>service#
fdb
Syntax fdb {info | mac ieee-address | sap sap-id | detail | endpoint endpoint}
[expiry] [pbb]
Context show>service>id
This command displays FDB entries for a given MAC address.
Description
sap sap-id — Specifies the physical port identifier portion of the SAP
Parameters
detail — Displays detailed information.
expiry — Displays time until MAC is aged out.
endpoint — Displays endpoint information.
pbb — Displays PBB information.
Show FDB Information — The following table describes service FDB output fields:
Output
7210-SAS M Services Guide
Label
Service Id
Mac Move Rate
Mac Move Retries
Table Size
Learned Count
Type
q-tag
Displays the service ID.
Displays the maximum rate at which MAC's can be re-learned in
this service, before the SAP where the moving MAC was last seen
is automatically disabled in order to protect the system against
undetected loops or duplicate MAs.
The rate is computed as the maximum number of re-learns allowed
in a 5 second interval: for example, the default rate of 2 re-learns
per second corresponds to 10 re-learns in a 5 second period.
Displays the number of times retries are performed for re-enabling
the SAP.
Specifies the maximum number of learned and static entries
allowed in the FDB of this service.
Displays the current number of learned entries in the FDB of this
service.
PBB Show Commands
AdmMTU OprMTU Adm
1518 1518 Up
Description
Page 481
Opr
Up