Alcatel-Lucent 7210 SAS M Service Manual page 684

Show, Clear, Debug Commands
service-using
Syntax service-using [epipe][vpls] [m-vpls] [sdp sdp-id] [customer customer-id]
Context show>service
This command displays the services matching certain usage properties. If no optional parameters are
Description
specified, all services defined on the system are displayed.
epipe — Displays matching Epipe services.
Parameters
vpls — Displays matching VPLS instances.
sdp sdp-id — Displays only services bound to the specified SDP ID.
Default
Values
customer customer-id — Displays services only associated with the specified customer ID.
Default
Values
Show Service Service-Using — The following table describes show command output fields.
Output
Service Id
Type
Adm
Opr
CustomerID
Last Mgmt Change
Sample Output
*A:ALA-12# show service service-using customer 10
==============================================================================
Services
==============================================================================
ServiceId
------------------------------------------------------------------------------
1
300
------------------------------------------------------------------------------
Matching Services : 2
==============================================================================
*A:ALA-12#
Page 684
Services bound to any SDP ID.
1 — 17407
Services associated with a customer.
1 — 2147483647
Label
The service identifier.
Specifies the service type configured for the service ID.
The desired state of the service.
The operating state of the service.
The ID of the customer who owns this service.
The date and time of the most recent management-initiated change to
this service.
Type Adm
VPLS Up
Epipe Up
Description
Opr CustomerId
Up 10
Up 10
Last Mgmt Change
09/05/2006 13:24:15
09/05/2006 13:24:15
7210 SAS M Services Guide