Creating A Vpls Service - Alcatel-Lucent 7210 SAS M Service Manual

Creating a VPLS Service

Use the following CLI syntax to create a VPLS service:
CLI Syntax: config>service# vpls service-id [customer customer-id] [cre-
ate][vpn vpn-id] [m-vpls] (for 7210 SAS-M in Network mode)
The following example displays a VPLS configuration:
*A:ALA-1>config>service>vpls# info
----------------------------------------------
...
...
----------------------------------------------
*A:ALA-1>config>service>vpls#
7210 SAS M Services Guide
config>service# vpls service-id [customer customer-id] [cre-
ate][ vpn vpn-id] [m-vpls] <service-id> [customer <custom-
er-id>] [create] [vpn <vpn-id>] [m-vpls] [svc-sap-type
{null-star|dot1q-preserve|any}] [customer-vid <vlan-id>]
(for 7210 SAS-M in Acess uplink mode)
description description-string
no shutdown
vpls 1000 customer 1 create
description "This is a VPLS with NULL SAP"
stp
shutdown
exit
no shutdown
exit
vpls 2000 customer 6 create
description "This is a Distributed VPLS with DOT1Q SAP"
stp
shutdown
exit
no shutdown
exit
Virtual Private LAN Services
Page 311