Alcatel-Lucent 7210 SAS M Service Manual page 217

svc-sap-type — Specifies the type of service and allowed SAPs in the service.
null-star — Specifies that the allowed SAP in the service that can be Null SAP, dot1q Default SAP,
dot1q — Specifies that the allowed SAP in the service are Dot1q SAPs and dot1q explicit null SAPs.
dot1q-preserve — Specifies that the allowed SAP in the service are Dot1q. The Dot1q ID is not
dot1q-range — Specifies that the access SAP in the service can use VLAN ranges as the SAP tags.
any — When svc-sap-type is set to any, for a NULL SAP, the system processes and forwards only
qinq-inner-tag-preserve — When svc-sap-type is set to this value, an Epipe service processes and
customer-vid vlan-id — Defines the dot1q VLAN ID to be specified while creating the local Dot1q
create — Keyword used to create the service instance. The create keyword requirement can be
endpoint
Syntax [no] endpoint endpoint-name
Context config>service>cpipe
config>service>epipe
This command configures a service endpoint.
Description
endpoint-name — Specifies an endpoint name.
Parameters
7210 SAS M Services Guide
1 — 2147483647
Values
null (0)
Default
Q.* SAP or Default QinQ SAP (also known as *.* SAP). Supported only in 7210 SAS-M access-
uplink mode.
Supported only in 7210 SAS-M access-uplink mode.
stripped after packets matches the SAP. Supported only in 7210 SAS-M access-uplink mode.
The VLAN ranges are configured using the configure> connection-profile CLI command. On
ingress of the access dot1q SAP using VLAN ranges, the outermost tag is not removed before
forwarding. Supported in both 7210 SAS-M network and access-uplink mode.
packets with no VLAN tag (that is, untagged). All other packets with one or more VLAN tags
(even those with priority tag only) are not processed and dropped. Users can use the service with
svc- sap-type set to null-star, to process and forward packets with one or more tags (including
priority tag) on a null SAP.
forwards packets received with 3 tags on a QinQ SAP. Please read the Epipe chapter above to
learn more about the support available and restrictions that apply. Supported only in 7210 SAS-
M network mode.
null-star
Default
SAP for svc-sap-type dot1q-preserve.
1 — 4094
Values
enabled/disabled in the environment>create context.
Virtual Leased Line Services
Page 217