Alcatel-Lucent 7210 SAS M Service Manual page 629

backup
Syntax [no] backup ip-address
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
This command configures virtual router IP addresses for the interface.
Description
init-delay
Syntax init-delay seconds
no init-delay
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
This command configures a VRRP initialization delay timer.
Description
no init-delay
Default
seconds — Specifies the initialization delay timer for VRRP, in seconds.
Parameters
mac
Syntax [no] mac ieee-mac-address
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
This command assigns a specific MAC address to an IP interface.
Description
The no form of this command returns the MAC address of the IP interface to the default value.
The physical MAC address associated with the Ethernet interface that the SAP is configured on.
Default
ieee-mac-address — Specifies the 48-bit MAC address for the static ARP in the form
Parameters
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
master-int-inherit
Syntax [no] master-int-inherit
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
This command allows the master instance to dictate the master down timer (non-owner context only).
Description
7210 SAS M Services Guide
1 — 65535
Values
Virtual Private Routed Network Services
Page 629