Alcatel-Lucent 7210 SAS M Service Manual page 415

Default blockable
blockable — The agent will monitor the MAC re-learn rate on the SAP, and it will block it when the
Parameters
non-blockable — When specified, this SAP will not be blocked, and another blockable SAP will be
mac-pinning
Syntax [no] mac-pinning
Context config>service>vpls>spoke-sdp
config>service>vpls>mesh-sdp
config>service>vpls>sap
config>service>pw-template
Description
This command disables re-learning of MAC addresses on other mesh SDPs within the VPLS.
The MAC address remains attached to a given Mesh for duration of its age-timer.
The age of the MAC address entry in the FIB is set by the age timer. If mac-aging is disabled on a
given VPLS service, any MAC address learned on a mesh with mac-pinning enabled remains in
the FIB on this mesh forever. Every event that otherwise results in re-learning is logged
(MAC address; original - mesh SDP; new - mesh SDP).
Default
max-nbr-mac-addr
Syntax max-nbr-mac-addr table-size
no max-nbr-mac-addr
Context config>service>vpls>sap
config>service>vpls>spoke-sdp
config>service>vpls>endpoint
config>service>pw-template
This command specifies the maximum number of FDB entries for both learned and static MAC
Description
addresses for this SAP, spoke SDP or endpoint.
When the configured limit has been reached, and discard-unknown-source has been enabled for this
SAP or spoke SDP (see
addresses will be discarded.
The no form of the command restores the global MAC learning limitations for the SAP or spoke SDP.
no max-nbr-mac-addr
Default
table-size — Specifies the maximum number of learned and static entries allowed in the FDB of this
Parameters
7210 SAS M Services Guide
re-learn rate is exceeded.
blocked instead.
MAC pinning is not enabled by default.
discard-unknown-source on page
service.
1 — 30719
Values
Virtual Private LAN Services
409), packets with unknown source MAC
Page 415