Ce To Pe Routing Protocols; Pe To Pe Tunneling Mechanisms; Per Vrf Route Limiting - Alcatel-Lucent 7210 SAS M Service Manual

CE to PE Routing Protocols

The 7210 SAS VPRN supports the following PE to CE routing protocols:
•
•

PE to PE Tunneling Mechanisms

The 7210 SAS supports multiple mechanisms to provide transport tunnels for the forwarding of
traffic between PE routers within the 2547bis network.
The 7210 SAS VPRN implementation supports the use of:
•
•
These transport tunnel mechanisms provide the flexibility of using dynamically created LSPs
where the service tunnels are automatically bound (the "autobind" feature) and the ability to
provide certain VPN services with their own transport tunnels by explicitly binding SDPs if
desired. When the autobind is used, all services traverse the same LSPs and do not allow alternate
tunneling mechanisms or the ability to craft sets of LSP's with bandwidth reservations for specific
customers as is available with explicit SDPs for the service.

Per VRF Route Limiting

The 7210 SAS allows setting the maximum number of routes that can be accepted in the VRF for
a VPRN service. There are options to specify a percentage threshold at which to generate an event
that the VRF table is near full and an option to disable additional route learning when full or only
generate an event.
7210-SAS M Services Guide
BGP
Static
RSVP-TE protocol to create tunnel LSP's between PE routers
LDP protocol to create tunnel LSP's between PE routers
Virtual Private Routed Network Services
Page 563