Alcatel-Lucent 7210 SAS M Service Manual page 771

paths
Syntax paths
Context show>router>bgp
This command displays a summary of BGP path attributes.
Description
Show Path Output — The following table describes the command output fields for a BGP path.
Output
Sample Output
*A:ALA-12# show router 3 bgp paths
==============================================================================
==============================================================================
BGP Paths
7210-SAS M Services Guide
Label
BGP Router ID
AS
Local AS
Path
Origin
Next Hop
MED
Local Preference
Refs
ASes
Segments
Flags
Aggregator
Community
Originator ID
Cluster List
BGP Router ID : 10.0.0.14
The local BGP router ID.
The configured autonomous system number.
The configured local AS setting. If not configured, then the value is the
same as the AS.
The AS path attribute.
EGP — The NLRI is learned by an EGP protocol.
IGP — The NLRI is interior to the originating AS.
INCOMPLETE — NLRI was learned another way.
The advertised BGP nexthop.
The Multi-Exit Discriminator value.
The local preference value.
The number of routes using a specified set of path attributes.
The number of autonomous system numbers in the AS path attribute.
The number of segments in the AS path attribute.
EBGP-learned — Path attributes learned by an EBGP peering.
IBGP-Learned — Path attributes learned by an IBGP peering.
The route aggregator ID.
The BGP community attribute list.
The originator ID path attribute value.
The route reflector cluster list.
AS : 65206
VPRN Show Commands
Description
Local AS : 65206
Page 771