Vpls Clear Commands - Alcatel-Lucent 7210 SAS M Service Manual

Show, Clear, Debug Commands

VPLS Clear Commands

id
Syntax id service-id
Context clear>service
clear>service>statistics
This command clears commands for a specific service.
Description
service-id — The ID that uniquely identifies a service.
Parameters
statistics
Syntax statistics
Context clear>service>stats
This command clears session statistics for this service.
Description
fdb
Syntax fdb {all | mac ieee-address | sap sap-id] | mesh-sdp sdp-id[:vc-id] | spoke-sdp sdp-id:vc-
id}
Context clear>service>id
This command clears FDB entries for the service.
Description
all — Clears all FDB entries.
Parameters
mac ieee-address — Clears only FDB entries in the FDB table with the specified 48-bit MAC
sap-id — Specifies the physical port identifier portion of the SAP definition. See
mesh-sdp — Clears only service FDB entries associated with the specified mesh SDP ID. For a mesh
spoke-sdp — Clears only service FDB entries associated with the specified spoke SDP ID. For a
sdp-id — The SDP ID for which to clear associated FDB entries.
Page 930
service-id: 1 — 214748364
Values
svc-name: A string up to 64 characters in length.
address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff
where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Command Descriptions on page 939
SDP, the VC ID is optional.
spoke SDP, the VC ID must be specified.
for command syntax.
7210 SAS M Services Guide
Common CLI