Alcatel-Lucent 7210 SAS M Service Manual page 899

Sample Output
A:7210>show>service>id# sap 1/1/1:1 detail
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id
SAP
Description
Admin State
Flags
Last Status Change : 10/05/2010 07:22:04
Last Mgmt Change
Dot1Q Ethertype
Max Nbr of MAC Addr: No Limit
Learned MAC Addr
Admin MTU
Ingr IP Fltr-Id
Ingr Mac Fltr-Id
tod-suite
Mac Learning
Mac Aging
7210 SAS M Services Guide
Label
SAP per Meter stats
Ingress Meter
For. InProf
For. OutProf
Ingress TD Profile
Egress TD Profile
Alarm Cell Han-
dling
AAL-5 Encap
Aggregate Policer
Loopback Mode
Loopback Src Addr
Loopback Dst Addr
No-svc-port used
: 1
: 1/1/1:1
: (Not Specified)
: Up
: ServiceAdminDown
: 10/05/2010 07:22:05
: 0x8100
: 0
: 1518
: n/a
: n/a
: None
: Enabled
: Enabled
Description (Continued)
Specifies the meter ID.
The number of in-profile packets and octets (rate below CIR) for-
warded.
The number of out-of-profile packets and octets. (rate above CIR and
below PIR) forwarded by the ingress meter.
The profile ID applied to the ingress SAP.
The profile ID applied to the egress SAP.
The indication that OAM cells are being processed.
The AAL-5 encapsulation type.
rate-indicates the rate of the aggregate policer.
burst-indicates the burst-size of the aggregate policer.
Displays the Ethernet port loopback mode
Displays the configured loopback source address
Displays the configured loopback destination address
Displays the port ID of the port on which no service is configured.
This port is used for the port loop back with MAC swap functionality.
VPLS Show Commands
Encap : q-tag
Oper State : Down
QinQ Ethertype : 0x8100
Total MAC Addr : 0
Static MAC Addr : 0
Oper MTU : 1518
Egr IP Fltr-Id : n/a
Egr Mac Fltr-Id : n/a
Discard Unkwn Srce: Disabled
Mac Pinning : Disabled
Page 899