Alcatel-Lucent 7210 SAS M Service Manual page 926

Show, Clear, Debug Commands
static
Syntax static [sap sap-id | sdp sdp-id:vc-id]
Context show>service>id>igmp-snooping
This command displays information on static IGMP snooping source groups for the VPLS service.
Description
sap sap-id — Displays static IGMP snooping source groups for a specific SAP. See
Parameters
sdp sdp-id — Displays the IGMP snooping source groups for a specific spoke or mesh SDP.
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Show Output — The following table describes the show output fields:
Output
Sample Output
*A:MTU-7210#
===============================================================================
IGMP Snooping Static Groups for service 100
===============================================================================
-------------------------------------------------------------------------------
IGMP Snooping Static Groups for SAP 1/1/2
-------------------------------------------------------------------------------
Group
-------------------------------------------------------------------------------
228.8.8.8
-------------------------------------------------------------------------------
Static (*,G) entries: 1
===============================================================================
*A:MTU-7210#
statistics
Syntax statistics [sap sap-id | sdp sdp-id:vc-id]
Context show>service>id>igmp-snooping
This command displays IGMP snooping statistics for the VPLS service.
Description
Page 926
Command Descriptions on page 939
1 — 17407
Values
For mesh SDPs only, all VC IDs.
Default
1 — 4294967295
Values
Label
Displays the IP source address used in IGMP queries.
Source
Displays the static IGMP snooping source groups for a specified SAP.
Group
show service id 100 igmp-snooping static
for command syntax.
Description
7210 SAS M Services Guide
Common CLI