Alcatel-Lucent 7210 SAS M Service Manual page 98

Hide thumbs Also See for 7210 SAS M:

Table of Contents

Customer Management Commands

[no] phone string

config>service>customer customer-id

This command adds telephone number information for a customer ID.

The no form of this command removes the phone number value from the customer ID.

string — The customer phone number entered as an ASCII string string up to 80 characters. If the

string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within

double quotes. Any printable, seven bit ASCII characters may be used within the string.

7210 SAS M Services Guide

Show Quick Links

Table of Contents