Vpls Debug Commands - Alcatel-Lucent 7210 SAS M Service Manual

VPLS Debug Commands

id
Syntax id service-id
Context debug>service
This command debugs commands for a specific service.
Description
service-id — The ID that uniquely identifies a service.
Parameters
event-type
Syntax [no] event-type {config-change | svc-oper-status-change | sap-oper-status-change|
sdpbind-oper-status-change}
Context debug>service>id
This command enables a particular debugging event type.
Description
The no form of the command disables the event type debugging.
config-change — Debugs configuration change events.
Parameters
svc-oper-status-change — Debugs service operational status changes.
sap-oper-status-change — Debugs SAP operational status changes.
sdpbind-oper-status-change — Debugs SDP operational status changes.
sap
Syntax [no] sap sap-id
Context debug>service>id
This command enables debugging for a particular SAP.
Description
sap-id — Specifies the SAP ID.
Parameters
stp
Syntax stp
Context debug>service>id
7210 SAS M Services Guide
service-id: 1 — 214748364
Values
svc-name: A string up to 64 characters in length.
VPLS Debug Commands
Page 935