Alcatel-Lucent 7210 SAS M Service Manual page 469

7210-SAS M Services Guide
Label
Service Id
Service Type
Description
Customer Id
Last Status Change
Last Mgmt Change
Admin State
Vc Switching
SAP Count
Uplink Type
Vpn Id
Oper State
SAP
Encap
QinQ Ethertype
Dot1Q Ethertype
Split Horizon
Group
Admin MTU
Oper MTU
Ingr IP Fltr-Id
Egr IP Fltr-Id
Ingr Mac Fltr-Id
Egr Mac Fltr-Id
Ingr IPv6 Fltr-Id
Egr IPv6 Fltr-Id
The service identifier.
Specifies the type of service.
Generic information about the service.
The customer identifier.
The date and time of the most recent status change to this customer.
The date and time of the most recent management-initiated change to
this customer.
The administrative state of the service
Displays the status of VC switching.
The number of SAPs specified for this service.
Displays the mode of the device.
The number which identifies the VPN.
The operational state of the service.
Displays the SAP ID.
The value of the label used to identify this SAP on the access port.
Displays the configured QinQ Ethertype value
Displays the configured Dot1Q Ethertype value
Displays the split horizon group information
The desired largest service frame size (in octets) that can be transmit-
ted through the port to the far-end router, without requiring the packet
to be fragmented.
The actual largest service frame size (in octets) that can be transmitted
through the port to the far-end router, without requiring the packet to
be fragmented.
Ingress IP filter ID.
Egress IP filter ID
Ingress MAC filter ID
Egress MAC filter ID
Ingress IPv6 filter ID
Egress IPv6 filter ID
PBB Show Commands
Description
Page 469