Alcatel-Lucent 7210 SAS M Service Manual page 933

spoke-sdp
Syntax spoke-sdp sdp-id[:vc-id] {all | counters | stp| l2pt}
Context clear>service>statistics>id
This command clears statistics for the spoke SDP bound to the service.
Description
sdp-id — The spoke SDP ID for which to clear statistics.
Parameters
vc-id — The virtual circuit ID on the SDP ID to be reset.
all — Clears all queue statistics and STP statistics associated with the SDP.
counters — Clears all queue statistics associated with the SDP.
stp — Clears all STP statistics associated with the SDP.
l2pt — Clears all L2PT statistics associated with the SDP.
stp
Syntax stp
Context clear>service>statistics>id
Clears all spanning tree statistics for the service ID.
Description
detected-protocols
Syntax detected-protocols {all | sap sap-id}
Context clear>service>id>stp
RSTP automatically falls back to STP mode when it receives an STP BPDU. The clear detected-
Description
protocols command forces the system to revert to the default RSTP mode on the SAP.
all — Clears all detected protocol statistics.
Parameters
sap-id — Clears the specified lease state SAP information. See
igmp-snooping
Syntax igmp-snooping
Context clear>service>id
This command enables the context to clear IGMP snooping data.
Description
7210 SAS M Services Guide
1 — 17407
Values
1 — 4294967295
Values
on page 939 for command syntax.
VPLS Clear Commands
Common CLI Command Descriptions
Page 933