Alcatel-Lucent 7210 SAS M Service Manual page 776

Show, Clear, Debug Commands
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
A:SR-12#
summary
Syntax summary [all]
Context show>router>bgp
This command displays a summary of BGP neighbor information.
Description
If confederations are not configured, that portion of the output will not display.
The "State" field displays the global BGP operational state. The valid values are:
all — Displays BGP peers in all instances.
Parameters
Show BGP Summary Output — The following table describes the command output fields for a
Output
BGP summary:
Page 776
Up — BGP global process is configured and running.
Down — BGP global process is administratively shutdown and not running.
Disabled — BGP global process is operationally disabled. The process must be restarted by the
operator.
For example, if a BGP peer is operationally disabled, then the state in the summary table shows
the state 'Disabled'
Label
BGP Router ID
AS
Local AS
BGP Admin State
BGP Oper State
Confederation AS
Member Confedera-
tions
Number of Peer
Groups
Number of Peers
The local BGP router ID.
The configured autonomous system number.
The configured local AS setting, if not configured it is the same as the
system AS.
Down — BGP is administratively disabled.
Up — BGP is administratively enabled.
Down — BGP is operationally disabled.
Up — BGP is operationally enabled.
The configured confederation AS.
The configured members of the BGP confederation.
The total number of configured BGP peer groups.
The total number of configured BGP peers.
Description
7210-SAS M Services Guide