Per-Vlan Spanning Tree Plus (Pvst+) - Dell S6000 Reference Manual

Per-VLAN Spanning Tree Plus (PVST+)

The Dell Networking operating software implementation of per-VLAN spanning tree plus (PVST+) is based
on the IEEE 802.1w standard spanning tree protocol.
Dell Networking OS supports PVST+ on the S6000 platform.
NOTE: For easier command line entry, the plus (+) sign is not used at the command line.
description
Enter a description of the PVST+.
S6000
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
Command SPANNING TREE PVST+ (The prompt is "config-pvst".)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
pre-Version
7.7.1.1
1090
Enter a description to identify the spanning tree (80
characters maximum).
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced.
Per-VLAN Spanning Tree Plus (PVST+)
39