Show Fip-Snooping System - Dell S6000 Reference Manual

Number of Multicast Discovery Solicits :0
Number of Unicast Discovery Solicits
Number of FLOGI
Number of FDISC
Number of FLOGO
Number of Enode Keep Alive
Number of VN Port Keep Alive
Number of Multicast Discovery Advertisement :4451
Number of Unicast Discovery Advertisement :2
Number of FLOGI Accepts
Number of FLOGI Rejects
Number of FDISC Accepts
Number of FDISC Rejects
Number of FLOGO Accepts
Number of FLOGO Rejects
Number of CVL
Number of FCF Discovery Timeouts
Number of VN Port Session Timeouts
Number of Session failures due to Hardware Config :0

show fip-snooping system

Display information on the status of FIP snooping on the switch (enabled or disabled), including the
number of FCoE VLANs, FCFs, ENodes, and currently active sessions.
Syntax
show fip-snooping system
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Example
Dell# show fip-snooping system
Global Mode : Enabled
FCOE VLAN List (Operational) : 1, 100
FCFs
Enodes
Sessions
FCoE Transit
EXEC
EXEC Privilege
Introduced on the S4820T.
Introduced on the S4810.
:0
:0
:0
:0
:0
:0
:2
:0
:16
:0
:0
:0
:0
:0
:0
: 1
: 2
: 17
577