Ip Dhcp Source-Address-Validation - Dell S6000 Reference Manual

Command line for the system
Hide thumbs Also See for S6000:
Table of Contents

Advertisement

Version 8.3.7.0
Version 7.8.1.0

ip dhcp source-address-validation

Enable IP source guard.
S6000
Syntax
[no] ip dhcp source-address-validation
Defaults
Disabled.
Command
INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
ip dhcp snooping vlan
Enable DHCP Snooping on one or more VLANs.
S6000
Syntax
[no] ip dhcp snooping vlan name
Parameters
name
Defaults
Disabled.
Command
CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1306
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the name of a VLAN on which to enable DHCP
Snooping.
Security

Advertisement

Table of Contents
loading

Table of Contents