Dell S6000 Reference Manual page 753

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

longer-prefixes

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.7.1.0

Version 7.6.1.0

The following describes the show ip fib stack-unit command shown in the

following example.

Dell#show ip fib stack-unit 0

------------------------------------------------------

10.10.10.10/32 Direct, Nu 0

-------------

IPv4 Routing

(OPTIONAL) Enter the keywords longer-prefixes to view

all routes with a common prefix.

(OPTIONAL) Enter the keyword summary to view the total

number of prefixes in the FIB.

EXEC Privilege

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added support for up to seven stack members.

Introduced on the S-Series.

Lists the destination IP address.

Displays either the word "direct" and an interface for a

directly connected route or the remote IP address used to

forward the traffic.

Displays the first hop IP address.

Displays the MAC address.

Displays the egress-port information.

Displays the VLAN ID. If no VLAN is assigned, zero (0) is

Displays the number of ECMP paths.

00:00:00:00:00:00