Lease - Dell S6000 Reference Manual

Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0

lease

Specify a lease time for the addresses in a pool.
S6000
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
days
hours
minutes
infinite
Defaults 24 hours
Command DHCP <POOL>
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
532
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the number of days of the lease. The range is from 0 to
31.
Enter the number of hours of the lease. The range is from 0
to 23.
Enter the number of minutes of the lease. The range is from
0 to 59.
Specify that the lease never expires.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Dynamic Host Configuration Protocol (DHCP)