Dei Enable - Dell S6000 Reference Manual

dei enable

Make packets eligible for dropping based on their DEI value.
S6000
Syntax
dei enable
Defaults Packets are colored green; no packets are dropped.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
dei honor
Honor the incoming DEI value by mapping it to an Dell Networking OS drop precedence. Enter the
command once for 0 and once for 1.
S6000
Syntax
dei honor {0 | 1} {green | red | yellow}
Parameters
0 | 1
green | red |
yellow
Defaults Disabled; Packets with an unmapped DEI value are colored green.
1436
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the bit value you want to map to a color.
Choose a color:
• Green: High priority packets that are the least preferred
to be dropped.
• Yellow: Lower priority packets that are treated as best-
effort.
• Red: Lowest priority packets that are always dropped
(regardless of congestion status).
VLAN Stacking