reset
command
Defaults
none
Command
CONFIGURATION
Modes
Command
Version 9.5.
History
(0.0)
Related
userrole
Commands
show role
Display information on permissions assigned to a command, including user role and/or permission level.
Syntax
show role mode {mode} {command}
Parameters
command
mode mode
Defaults
none
Command
EXEC Privilege
Modes
Command
Version 9.5(0.0)
History
Examples
Dell#show role mode configure username
Role access: sysadmin
Dell#show role mode configure management route
Role access: netadmin, sysadmin
1310
Enter the keyword reset to reset all roles back to default for
that command.
Enter the command's keywords to assign the command to a
certain access level. You can enter one or more keywords.
Introduced on the Z9000, S6000, S4820T, S4810, MXL
Enter the command's keywords to assign the command to a
certain access level. You can enter one or all of the
keywords.
Enter keyword then one of the following modes.
•
configure
•
exec
•
interface
•
line
•
route-map
•
router
Introduced on the Z9000, S6000, S4820T, S4810, MXL
Security