Dell S6000 Reference Manual page 588

summary
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.4.1.0
Usage Executing this command without the optional ring-id command clears the
Information
statistics counters on all the available rings. Dell Networking OS requires a
command line confirmation before the command executes. This command clears
the following counters:
•
•
•
Usage Executing this command without the optional ring-id command clears the
Information
statistics counters on all the available rings. Dell Networking OS requires a
command line confirmation before the command is executed. This command
clears the following counters:
•
•
•
Example
Dell#show frrp summary
(Summary)
Ring-ID State Mode
----------------------------------------------
2
31
50
Dell#
Example (1)
Dell#show frrp 1
Ring protocol 1 is in Master mode
Ring Protocol Interface:
588
(OPTIONAL) Enter the keyword summary to view just a
summarized version of the Ring configuration.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
Ctrl_Vlan Member_Vlans
UP Master
UP Transit
Down Transit
2 11-20, 25,27-30
31 40-41
50 32
Force10 Resilient Ring Protocol (FRRP)