Online Stack-Unit - Dell S6000 Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.7.1.0
Usage
You cannot enter this command on a Master or Standby unit.
Information
The system reboots when the off-line diagnostics complete. This reboot is an
automatic process. A warning message appears when the offline stack-unit
command is implemented.
Warning - Diagnostic execution will cause stack-unit to reboot
after completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
Related
show environment (S-Series)
Commands
example, temperature, voltage).

online stack-unit

Place a stack unit in the online state.
S6000
Syntax
online stack-unit number
Parameters
number
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
506
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added a warning message to the off-line diagnostic.
Introduced on the S-Series.
— views the S-Series system component status (for
Enter the stack-unit number. The S6000 range is from 0 to 5.
Introduced on the S6000.
Introduced on the S4810.
Debugging and Diagnostics