Dell S6000 Reference Manual page 1008

Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Version 8.3.7.0
Version 7.9.1.0
Version 7.8.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage If you delete all the network area commands for Area 0, the show ip ospf
Information
command output does not list Area 0.
The following describes the show ip ospf command shown in the following
example.
Line Beginning
with
"Routing
Process..."
"Supports only..."
"SPF schedule..."
"Convergence
Level"
1008
EXEC
EXEC Privilege
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added output for LSA throttling timers.
Introduced on the S4810.
Added support for VRF.
Added support of Multi-Process OSPF.
Added the process-id option, in support of Multi-Process
OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the OSPF process ID and the IP address associated
with the process ID.
Displays the number of Type of Service (TOS) rouse
supported.
Displays the delay and hold time configured for this process
ID.
Open Shortest Path First (OSPFv2 and OSPFv3)