Ip Ssh Rekey - Dell S6000 Reference Manual

ip ssh rekey

Configures the time rekey-interval or volume rekey-limit threshold at which to re-generate the SSH key
during an SSH session.
Syntax
ip ssh rekey [time rekey-interval] [volume rekey-limit]
To reset to the default, use no ip ssh rekey [time rekey-interval]
[volume rekey-limit] command.
Parameters
time minutes
volume rekey-
limit
Defaults The default time is 60 minutes. The default volume is 1024 megabytes.
Command CONFIGURATION mode
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
ip ssh pub-key-file
Specify the file used for host-based authentication.
S6000
Syntax
ip ssh pub-key-file {WORD}
Parameters
WORD
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Security
Enter the keywords time then the amount of time in
minutes. The range is from 10 to 1440 minutes. The default is
60 minutes
Enter the keywords volume then the amount of volume in
megabytes. The range is from 1 to 4096 to megabytes. The
default is 1024 megabytes
Introduced on the Z9000, S6000, S4820T, S4810, MXL
Enter the file name for the host-based authentication.
1287