Priority-Pgid - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

and ETS settings in the map are applied when the Ethernet port is enabled. DCBx is

enabled on Ethernet ports by default.

The dcb-map command is supported only on physical Ethernet interfaces.

To remove a DCB map from an interface, enter the no dcb-map map-name

command in Interface configuration mode.

priority-pgid

Assign 802.1p priority traffic to a priority group in a DCB map.

priority-pgid dot1p0_group-num dot1p1_group-num dot1p2_group-

num dot1p3_group-num dot1p4_group-num dot1p5_group-num

dot1p6_group-num dot1p7_group-num

dot1p0_group-

dot1p1_group-

dot1p2_group-

dot1p3_group-

dot1p4_group-

dot1p5_group-

dot1p6_group-

dot1p7_group-

Version 9.3(0.0)

Enter the priority group number for each 802.1p class of

traffic in a DCB map.

Introduced on the S4810, S6000 platforms.

Data Center Bridging (DCB)