Dell S6000 Reference Manual page 1355

3] [encrypted] [auth {md5 | sha} auth-password] [priv {des56 |
aes128–cfb} priv-password] [access access-list-name | ipv6
access-list-name | access-list-name ipv6 access-list-name]
command.
Parameters
auth-password
aes128
priv-password
Defaults If no authentication or privacy option is configured, then the messages are
exchanged (attempted anyway) without any authentication or encryption.
Command CONFIGURATION
Modes
Command
Version 9.3(0.0)
History
Usage To enable robust, effective protection and security for SNMP packets transferred
Information between the server and the client, you can use the snmp-server user
username group groupname 3 auth authentication-type auth-
password priv aes128 priv-password to specify that AES128-CFB
encryption algorithm needs to be used.
You cannot modify the FIPS mode if SNMPv3 users are already configured and
present in the system. An error message is displayed if you attempt to change the
FIPS mode by using the fips mode enable command in Global Configuration
mode. You can enable or disable FIPS mode only if SNMPv3 users are not
previously set up. Otherwise, you must remove the previously configured users
before you change the FIPS mode.
Example
Dell# snmp-server user privuser v3group v3 encrypted auth md5
9fc53d9d908118b2804fe80e3ba8763d priv aes128
d0452401a8c3ce42804fe80e3ba8763d
Related show snmp user
Commands
Simple Network Management Protocol (SNMP) and Syslog
(OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the agent to receive packets from the
host and to send packets to the host. Minimum: eight
characters long.
(OPTIONAL) Enter the keyword aes128 to initiate the
AES128-CFB encryption algorithm for transmission of SNMP
packets.
(OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the host to encrypt the contents of
the message it sends to the agent and to decrypt the
contents of the message it receives from the agent.
Minimum: eight characters long.
Added support for the AES128-CFB encryption algorithm on
the S4820T, S4810, S6000 and Z-Series platforms
— Displays the information configured on each SNMP user name.
1355