Dell S6000 Reference Manual page 834

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 7.8.1.0

To configure an IS-IS network entity title (NET) for a routing process, use this mandatory command. If

you did not configure a NET, the IS-IS process does not start.

net network-entity-title

To remove a net, use the no net network-entity-title command.

entity-title

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Specify the area address and system ID for an IS-IS routing

process. The first 1 to 13 bytes identify the area address. The

next 6 bytes identify the system ID. The last 1 byte is the

selector byte, always identified as zero zero (00). This

argument can be applied to an address or a name.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Intermediate System to Intermediate System (IS-IS)