Radius-Server Key - Dell S6000 Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Usage
You can use this command to associate a group of RADIUS servers with a VRF and
Information
source interface. You can configure the source interface only with the VRF
attribute and source interface is optional with the VRF attributes.
If VRF is not configured on the RADIUS group, then the group is considered to be
on the default VRF. It is possible to use the default VRF name; however, you cannot
configure the source interface with the default VRF as such a configuration results
in conflicts between the source interfaces corresponding to the 802.1x supplicants
on that default VRF.
RADIUS groups and VRFs have one-to-one mapping. If a VRF is configured with
one RADIUS group, then you cannot use the same VRF with another RADIUS
group. When the VRF is removed, then the corresponding RADIUS group is also
removed automatically.
Example
Dell(conf)#radius-server group group1
Dell(conf-radius-group)#radius-server vrf vrf1 source-
interface tengigabitethernet 0/36
Dell(conf)#radius-server group group2
Dell(conf-radius-group)#radius-server vrf default

radius-server key

Configure a key for all RADIUS communications between the switch and the RADIUS host server.
S6000
Syntax
radius-server key [encryption-type] key
To delete a password, use the no radius-server key command.
Parameters
encryption-
type
key
Defaults Not configured.
1256
Introduced on the S-Series and Z-Series.
(OPTIONAL) Enter either zero (0) or 7 as the encryption type
for the key entered. The options are:
• 0 is the default and means the key is not encrypted and
stored as clear text.
• 7 means that the key is encrypted and hidden.
Enter a string that is the key to be exchanged between the
switch and RADIUS servers. It can be up to 42 characters
long.
Security