Dell S6000 Reference Manual page 749

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

Name/address

Name servers

Dell#show hosts

Default domain is not set

Name/address lookup uses static mappings

Name servers are not set

-------- -----

IPv4 Routing

States if DNS is enabled on the system.

If DNS is enabled, the Name/Address lookup is domain

If DNS is not enabled, the Name/Address lookup is static

Lists the name servers, if configured.

Displays the host name assigned to the IP address.

Classifies the entry as one of the following:

perm — the entry was manually configured and will not

temp — the entry was learned and will time out after 72

hours of inactivity.

Also included in the flag is an indication of the validity of the

ok — the entry is valid.

ex — the entry expired.

?? — the entry is suspect.

Displays the amount of time until the entry ages out of the

cache. For dynamically learned entries only.

Displays IP as the type of entry.

Displays the IP addresses assigned to the host.

(perm, OK) -

— views the DNS resolution.

— configures a host.