Fefd-Global Interval - Dell S6000 Reference Manual

Version 8.3.11.1
Version
8.3.12.0
Legacy E-
Series
command.
Related
•
Commands

fefd-global interval

Configure an interval between FEFD control packets.
Syntax
fefd-global interval seconds
To return to the default value, use the no fefd-global interval command.
Parameters
seconds
Defaults 15 seconds
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Legacy E-
Series
command.
Related
•
Commands
•
Layer 2
Introduced on the Z9000.
Introduced on the S4810.
fefd — enables far-end failure detection.
Enter a number as the time between FEFD control packets.
The range is from 3 to 300 seconds. The default is 15
seconds.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
fefd — enables far-end failure detection.
fefd-global — enables FEFD globally on the system.
893