Summary-Address - Dell S6000 Reference Manual

1.1.1.1
Dell#

summary-address

To advertise one external route, set the OSPF ASBR.
S6000
Syntax
summary-address ip-address mask [not-advertise] [tag tag-value]
To disable summary address, use the no summary-address ip-address mask
command.
Parameters
ip-address
mask
not-advertise
tag tag-value
Defaults Not configured.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
1042
E/-/-/ 1 10.0.0.1
Specify the IP address in dotted decimal format of the
address to summarize.
Specify the mask in dotted decimal format of the address to
summarize.
(OPTIONAL) Enter the keywords not-advertise to
suppress that match the network prefix/mask pair.
(OPTIONAL) Enter the keyword tag then a value to match
on routes redistributed through a route map. The range is
from 0 to 4294967295.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Gi 7/1 1
Open Shortest Path First (OSPFv2 and OSPFv3)